Wheel bearing Toyota RAV4 XA50 rear (2018–2025) — SKF, FAG, Timken, SNR
Rear wheel bearing for Toyota RAV4 XA50 (2018–2025) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Technical Specifications
| Parameter | Value |
|---|---|
| Make / Model | Toyota RAV4 XA50 |
| Production Years | 2018–2025 |
| Axle | Rear |
| Bearing type | hub unit |
| Inner diameter | 36 mm |
| Outer diameter | 80 mm |
| Width | 43 mm |
| ABS sensor | Integrated |
| Replacement Interval | 150 000 km |
Compatible Wheel Bearings
| Manufacturer | Part number | Grade |
|---|---|---|
| SKF | VKBA7672 | OE quality |
| FAG (Schaeffler) | 713644760 | OE quality |
| Timken | SP530111 | OE quality |
| SNR (NTN) | R186.49 | OE quality |
| Koyo | HA590302 | OE quality |
Replacement Interval
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling noise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
FAQ
Which wheel bearing fits Toyota RAV4 XA50 rear?
SKF VKBA7672, FAG 713644760, Timken SP530111. Dimensions: 36×80×43 mm. Integrated ABS sensor: yes.
How do I diagnose a bad wheel bearing on Toyota RAV4 XA50?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Where to Buy