Wheel bearing Toyota Hilux VIII front (2016–2024) — SKF, FAG, Timken, SNR
Front wheel bearing for Toyota Hilux VIII (2016–2024) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Technical Specifications
| Parameter | Value |
|---|---|
| Make / Model | Toyota Hilux VIII |
| Production Years | 2016–2024 |
| Axle | Front |
| Bearing type | hub unit |
| Inner diameter | 35 mm |
| Outer diameter | 88 mm |
| Width | 47 mm |
| ABS sensor | Integrated |
| Replacement Interval | 120 000 km |
Compatible Wheel Bearings
| Manufacturer | Part number | Grade |
|---|---|---|
| SKF | VKBA7560 | OE quality |
| FAG (Schaeffler) | 713623950 | OE quality |
| Timken | SP600101 | OE quality |
| SNR (NTN) | R190.08 | OE quality |
| Koyo | HA591301 | OE quality |
Replacement Interval
Wheel bearings typically last 120 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling noise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
FAQ
Which wheel bearing fits Toyota Hilux VIII front?
SKF VKBA7560, FAG 713623950, Timken SP600101. Dimensions: 35×88×47 mm. Integrated ABS sensor: yes.
How do I diagnose a bad wheel bearing on Toyota Hilux VIII?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Where to Buy