OEM Cross-Reference | oemcross.com

Wheel bearing Citroen C3 III front (2016–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Citroen C3 III (2016–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Technical Specifications

ParameterValue
Make / ModelCitroen C3 III
Production Years2016–2023
AxleFront
Bearing typehub-unit
Inner diameter30 mm
Outer diameter68 mm
Width37 mm
ABS sensorIntegrated
Replacement Interval150 000 km

Compatible Wheel Bearings

ManufacturerPart numberGrade
SKFSKF VKBA3471OE quality
FAG (Schaeffler)FAG 713619430OE quality
TimkenTimken SP530205OE quality
SNR (NTN)SNR R140.38OE quality
KoyoKoyo WB01180OE quality

Replacement Interval

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

FAQ

Which wheel bearing fits Citroen C3 III front?

SKF SKF VKBA3471, FAG FAG 713619430, Timken Timken SP530205. Dimensions: 30×68×37 mm. Integrated ABS sensor: yes.

How do I diagnose a bad wheel bearing on Citroen C3 III?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.