OEM Крос-Референс | oemcross.com

Wheel bearing Toyota Hilux VIII front (2016–2024) — SKF, FAG, Timken, SNR

Front wheel bearing for Toyota Hilux VIII (2016–2024) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Технічні характеристики

ParameterValue
Марка / МодельToyota Hilux VIII
Роки випуску2016–2024
AxleFront
Тип підшипникаhub unit
Внутрішній діаметр35 мм
Зовнішній діаметр88 мм
Ширина47 мм
Датчик ABSNot included
Інтервал заміни120 000 км

Сумісні Wheel Bearings

ВиробникАртикулКлас
SKFVKBA7560OE quality
FAG (Schaeffler)713623950OE quality
TimkenSP600101OE quality
SNR (NTN)R190.08OE quality
KoyoHA591301OE quality

Інтервал заміни

Wheel bearings typically last 120 000 км. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Huммing or growling ніise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Часті запитання

Which wheel bearing fits Toyota Hilux VIII front?

SKF VKBA7560, FAG 713623950, Timken SP600101. Dimensions: 35×88×47 мм.

How do I diagніse a bad wheel bearing on Toyota Hilux VIII?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 км/h on a quiet road — huммing that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.