Wheel bearing Hyundai Tucson NX4 rear (2020–2025) — SKF, FAG, Timken, SNR
Rear wheel bearing for Hyundai Tucson NX4 (2020–2025) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Технічні характеристики
| Parameter | Value |
|---|---|
| Марка / Модель | Hyundai Tucson NX4 |
| Роки випуску | 2020–2025 |
| Axle | Rear |
| Тип підшипника | hub unit |
| Внутрішній діаметр | 36 мм |
| Зовнішній діаметр | 80 мм |
| Ширина | 43 мм |
| Датчик ABS | Not included |
| Інтервал заміни | 150 000 км |
Сумісні Wheel Bearings
| Виробник | Артикул | Клас |
|---|---|---|
| SKF | VKBA6911 | OE quality |
| FAG (Schaeffler) | 713644780 | OE quality |
| Timken | SP530211 | OE quality |
| SNR (NTN) | R186.51 | OE quality |
| Koyo | HA590602 | OE quality |
Інтервал заміни
Wheel bearings typically last 150 000 км. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Huммing or growling ніise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Часті запитання
Which wheel bearing fits Hyundai Tucson NX4 rear?
SKF VKBA6911, FAG 713644780, Timken SP530211. Dimensions: 36×80×43 мм.
How do I diagніse a bad wheel bearing on Hyundai Tucson NX4?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 км/h on a quiet road — huммing that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.