Wheel bearing Opel Insignia B front (2017–2023) — SKF, FAG, Timken, SNR
Front wheel bearing for Opel Insignia B (2017–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Технічні характеристики
| Parameter | Value |
|---|---|
| Марка / Модель | Opel Insignia B |
| Роки випуску | 2017–2023 |
| Axle | Front |
| Тип підшипника | hub-unit |
| Внутрішній діаметр | 34 мм |
| Зовнішній діаметр | 72 мм |
| Ширина | 37 мм |
| Датчик ABS | Not included |
| Інтервал заміни | 150 000 км |
Сумісні Wheel Bearings
| Виробник | Артикул | Клас |
|---|---|---|
| SKF | SKF VKBA6621 | OE quality |
| FAG (Schaeffler) | FAG 713619510 | OE quality |
| Timken | Timken SP620212 | OE quality |
| SNR (NTN) | SNR R186.14 | OE quality |
| Koyo | Koyo WB01187 | OE quality |
Інтервал заміни
Wheel bearings typically last 150 000 км. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Huммing or growling ніise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Часті запитання
Which wheel bearing fits Opel Insignia B front?
SKF SKF VKBA6621, FAG FAG 713619510, Timken Timken SP620212. Dimensions: 34×72×37 мм.
How do I diagніse a bad wheel bearing on Opel Insignia B?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 км/h on a quiet road — huммing that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.