OEM Крос-Референс | oemcross.com

Wheel bearing BMW X1 F48 front (2015–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for BMW X1 F48 (2015–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Технічні характеристики

ParameterValue
Марка / МодельBMW X1 F48
Роки випуску2015–2023
AxleFront
Тип підшипникаhub-unit
Внутрішній діаметр34 мм
Зовнішній діаметр80 мм
Ширина45 мм
Датчик ABSNot included
Інтервал заміни150 000 км

Сумісні Wheel Bearings

ВиробникАртикулКлас
SKFSKF VKBA6818OE quality
FAG (Schaeffler)FAG 713667330OE quality
TimkenTimken SP620304OE quality
SNR (NTN)SNR R159.03OE quality
KoyoKoyo WB01188OE quality

Інтервал заміни

Wheel bearings typically last 150 000 км. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Huммing or growling ніise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Часті запитання

Which wheel bearing fits BMW X1 F48 front?

SKF SKF VKBA6818, FAG FAG 713667330, Timken Timken SP620304. Dimensions: 34×80×45 мм.

How do I diagніse a bad wheel bearing on BMW X1 F48?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 км/h on a quiet road — huммing that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.