OEM Çapraz Referans | oemcross.com

Wheel bearing Ford Focus IV front (2018–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Ford Focus IV (2018–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Teknik Özellikler

ParameterValue
Marka / ModelFord Focus IV
Üretim Yılları2018–2023
AxleFront
Rulman tipihub unit
İç çap28 mm
Dış çap72 mm
Genişlik40 mm
ABS sensörüNot included
Değişim Aralığı150 000 km

Uyumlu Wheel Bearings

ÜreticiParça numarasıKalite
SKFVKBA6868OE quality
FAG (Schaeffler)713645170OE quality
TimkenSP570101OE quality
SNR (NTN)R151.10OE quality
KoyoHA590501OE quality

Değişim Aralığı

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling hayırise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Sıkça sorulan sorular

Which wheel bearing fits Ford Focus IV front?

SKF VKBA6868, FAG 713645170, Timken SP570101. Dimensions: 28×72×40 mm.

How do I diaghayırse a bad wheel bearing on Ford Focus IV?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.