Engine oil Mitsubishi L200 4D56 (2.5 TD) — viscosity and approvals

Which engine oil for Mitsubishi L200 4D56 (2.5 TD, 2005–2015) — viscosity, specifications, capacity and change interval.

Engine Specifications

Recommended Oil

Change oil when either condition is reached — mileage OR time. Never exceed both limits simultaneously.

Approved Oil Brands

Castrol CRB TURBO 15W-40 / Shell Rimula R4 L / Mobil Delvac MX 15W-40

How to Choose Oil for 4D56

1. Viscosity must match specification — using the wrong viscosity grade is not acceptable. Only 5W-30 is approved for 4D56.
2. Check the approval code on the label — the can must show API CF / Mitsubishi spec compliance. Regular oil with an incorrect approval may damage the engine.
3. Volume — when changing with a new filter, you need 7.0 L. Check the oil level with the dipstick 5 minutes after filling.
4. Do not mix grades — if topping up, use the same viscosity and specification.

Consequences of Using the Wrong Oil

• Oil with a wrong approval for a diesel engine can clog the DPF filter (diesel) or cause excessive oil consumption.
• Too thin oil (e.g. 10W-40 instead of 5W-30) accelerates timing chain/belt and crankshaft bearing wear.
• Too thick oil makes cold starting difficult and increases fuel consumption.

Sikca sorulan sorular

What oil goes in a Mitsubishi L200 4D56?

Viscosity 5W-30, approval API CF / Mitsubishi spec, volume 7.0 L. Recommended brands: Castrol CRB TURBO 15W-40 / Shell Rimula R4 L / Mobil Delvac MX 15W-40.

How often to change the oil in Mitsubishi L200?

Every 10 000 km or 12 months — whichever comes first. With heavy city driving or short trips, every 7,500–10,000 km.

How much oil does the 4D56 take?

7.0 litres with a new filter. Before ordering, double-check — some L200 variants with the same engine code may differ by 0.2–0.5 L.