OEM Cross-Reference | oemcross.com

Spark plugs BMW 1 Series F20 B38A15A (1.5) — NGK, Bosch, Denso

Spark plugs for BMW 1 Series F20 B38A15A (1.5L, 2015–2019) — OEM-spec NGK, Bosch, Denso and Champion part numbers with replacement interval.

Engine Specifications

ParameterValue
Make / ModelBMW 1 Series F20
Engine CodeB38A15A
Displacement / Fuel1.5L petrol
Production Years2015–2019
Plug typeiridium
ThreadM12x1.25
Reach26.5 mm
Hex size16 mm
Electrode gap0.7 mm
Heat range8

Compatible Spark Plugs

BrandPart NumberType
NGKILZFR6D11OE supplier
Bosch0 242 236 573OE supplier
DensoIWF20OE supplier
Champion9003aftermarket

Replacement Interval

ParameterValue
Mileage60 000 km
Time4 years

Iridium and platinum plugs last 2–3× longer than standard copper plugs. Replace them on schedule — worn plugs increase fuel consumption by 3–5% and reduce power output.

Choosing Spark Plugs for B38A15A

  1. Use the correct plug type — the B38A15A requires iridium plugs. Upgrading from standard to iridium is acceptable.
  2. Check the electrode gap — verify the gap is 0.7 mm before installation.
  3. Torque correctly — for M12x1.25 thread: aluminium head 20–25 Nm, cast iron head 25–30 Nm.
  4. Replace as a full set — always replace all cylinders at once to ensure even combustion across all cylinders.

FAQ

Which spark plugs fit BMW 1 Series F20 B38A15A?

NGK ILZFR6D11, Bosch 0 242 236 573, Denso IWF20. All three are OE suppliers and guarantee compatibility with this engine.

How often should spark plugs be replaced on BMW 1 Series F20?

Every 60 000 km or 4 years, whichever comes first. Iridium plugs (ILZFR6D11) have a longer service life compared to standard nickel plugs.

Can I fit a different type of spark plug in the B38A15A?

Upgrading to iridium or platinum is acceptable and gives a slight improvement in cold starts. Do not change the heat range (8) — an incorrect heat range can cause pre-ignition or fouling.