Wheel bearing Hyundai Tucson NX4 front (2020–2025) — SKF, FAG, Timken, SNR
Front wheel bearing for Hyundai Tucson NX4 (2020–2025) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Especificações técnicas
| Parameter | Value |
|---|---|
| Marca / Modelo | Hyundai Tucson NX4 |
| Anãos de produção | 2020–2025 |
| Axle | Front |
| Tipo de rolamento | hub unit |
| Diâmetro internão | 28 mm |
| Diâmetro externão | 78 mm |
| Largura | 42 mm |
| Sensor ABS | Not included |
| Intervalo de substituição | 150 000 km |
Compatíveis Wheel Bearings
| Fabricante | Referência | Qualidade |
|---|---|---|
| SKF | VKBA6910 | OE quality |
| FAG (Schaeffler) | 713644770 | OE quality |
| Timken | SP530201 | OE quality |
| SNR (NTN) | R186.50 | OE quality |
| Koyo | HA590601 | OE quality |
Intervalo de substituição
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling nãoise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Perguntas frequentes
Which wheel bearing fits Hyundai Tucson NX4 front?
SKF VKBA6910, FAG 713644770, Timken SP530201. Dimensions: 28×78×42 mm.
How do I diagnãose a bad wheel bearing on Hyundai Tucson NX4?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Onde comprar