OEM Referência Cruzada | oemcross.com

Wheel bearing Ford Ranger T6 front (2011–2022) — SKF, FAG, Timken, SNR

Front wheel bearing for Ford Ranger T6 (2011–2022) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificações técnicas

ParameterValue
Marca / ModeloFord Ranger T6
Anãos de produção2011–2022
AxleFront
Tipo de rolamentohub unit
Diâmetro internão33 mm
Diâmetro externão85 mm
Largura45 mm
Sensor ABSNot included
Intervalo de substituição120 000 km

Compatíveis Wheel Bearings

FabricanteReferênciaQualidade
SKFVKBA7471OE quality
FAG (Schaeffler)713623900OE quality
TimkenSP590101OE quality
SNR (NTN)R190.05OE quality
KoyoHA591201OE quality

Intervalo de substituição

Wheel bearings typically last 120 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nãoise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Perguntas frequentes

Which wheel bearing fits Ford Ranger T6 front?

SKF VKBA7471, FAG 713623900, Timken SP590101. Dimensions: 33×85×45 mm.

How do I diagnãose a bad wheel bearing on Ford Ranger T6?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.