OEM Referência Cruzada | oemcross.com

Wheel bearing Hyundai Tucson TL front (2015–2020) — SKF, FAG, Timken, SNR

Front wheel bearing for Hyundai Tucson TL (2015–2020) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificações técnicas

ParameterValue
Marca / ModeloHyundai Tucson TL
Anãos de produção2015–2020
AxleFront
Tipo de rolamentohub-unit
Diâmetro internão42 mm
Diâmetro externão75 mm
Largura38 mm
Sensor ABSNot included
Intervalo de substituição150 000 km

Compatíveis Wheel Bearings

FabricanteReferênciaQualidade
SKFSKF VKBA7590OE quality
FAG (Schaeffler)FAG 713680310OE quality
TimkenTimken SP600209OE quality
SNR (NTN)SNR R169.16OE quality
KoyoKoyo WB01198OE quality

Intervalo de substituição

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nãoise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Perguntas frequentes

Which wheel bearing fits Hyundai Tucson TL front?

SKF SKF VKBA7590, FAG FAG 713680310, Timken Timken SP600209. Dimensions: 42×75×38 mm.

How do I diagnãose a bad wheel bearing on Hyundai Tucson TL?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.