OEM Referência Cruzada | oemcross.com

Wheel bearing Honda Civic X front (2016–2021) — SKF, FAG, Timken, SNR

Front wheel bearing for Honda Civic X (2016–2021) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificações técnicas

ParameterValue
Marca / ModeloHonda Civic X
Anãos de produção2016–2021
AxleFront
Tipo de rolamentohub-unit
Diâmetro internão42 mm
Diâmetro externão75 mm
Largura38 mm
Sensor ABSNot included
Intervalo de substituição150 000 km

Compatíveis Wheel Bearings

FabricanteReferênciaQualidade
SKFSKF VKBA7448OE quality
FAG (Schaeffler)FAG 713680270OE quality
TimkenTimken SP570205OE quality
SNR (NTN)SNR R168.26OE quality
KoyoKoyo WB01195OE quality

Intervalo de substituição

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nãoise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Perguntas frequentes

Which wheel bearing fits Honda Civic X front?

SKF SKF VKBA7448, FAG FAG 713680270, Timken Timken SP570205. Dimensions: 42×75×38 mm.

How do I diagnãose a bad wheel bearing on Honda Civic X?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.