OEM Referência Cruzada | oemcross.com

Wheel bearing Audi A4 B9 front (2015–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Audi A4 B9 (2015–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificações técnicas

ParameterValue
Marca / ModeloAudi A4 B9
Anãos de produção2015–2023
AxleFront
Tipo de rolamentohub unit
Diâmetro internão25 mm
Diâmetro externão66 mm
Largura37 mm
Sensor ABSNot included
Intervalo de substituição150 000 km

Compatíveis Wheel Bearings

FabricanteReferênciaQualidade
SKFVKBA6590OE quality
FAG (Schaeffler)713678280OE quality
TimkenSP500400OE quality
SNR (NTN)R155.90OE quality
KoyoHA590101OE quality

Intervalo de substituição

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nãoise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Perguntas frequentes

Which wheel bearing fits Audi A4 B9 front?

SKF VKBA6590, FAG 713678280, Timken SP500400. Dimensions: 25×66×37 mm.

How do I diagnãose a bad wheel bearing on Audi A4 B9?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.