Brake fluid Jeep Renegade (2014–2023) — DOT 4 specification
Brake fluid for Jeep Renegade (2014–2023) — required specification, boiling points, system volume, and approved brands.
Especificações técnicas
| Parameter | Value |
|---|---|
| Marca / Modelo | Jeep Renegade |
| Anãos de produção | 2014–2023 |
| Especificação do fluido | DOT 4 |
| Ponto de ebulição seco | 230°C |
| Ponto de ebulição húmido | 155°C |
| Volume do sistema | 500 ml |
| Intervalo de troca | 60 000 km / anãos |
Marcas aprovadas
Mopar DOT 4 / Castrol DOT 4 / ATE Super DOT 4
Why Brake Fluid Must Be Changed Regularly
Brake fluid is hygroscopic — it absorbs moisture from the air over time. As moisture content increases, the boiling point drops significantly. When the fluid boils under heavy braking, vapour bubbles form and the pedal goes to the floor (vapour lock). Jeep requires DOT 4 with a dry boiling point of at least 230°C.
How to Check Brake Fluid Condition
- Test strips — dip a strip in the reservoir; colour indicates moisture content
- Electronic tester — measures boiling point directly (most accurate)
- Visual inspection — dark/brown fluid indicates it must be replaced (fresh fluid is amber/clear)
Perguntas frequentes
What brake fluid does Jeep Renegade use?
DOT 4 specification. Ponto de ebulição seco: 230°C. Volume do sistema: 500 ml. Marcas aprovadas: Mopar DOT 4 / Castrol DOT 4 / ATE Super DOT 4.
How often should I change brake fluid in Jeep Renegade?
Every 60 000 km or every anãos — whichever comes first. This is a safety-critical service.
Can I mix different DOT grades?
You can mix DOT 3 and DOT 4 in an emergency, but never mix DOT 5 (silicone-based) with DOT 3/4 (glycol-based). Always use the correct specification: DOT 4.
Onde comprar