Wheel bearing Ford Focus IV front (2018–2023) — SKF, FAG, Timken, SNR
Front wheel bearing for Ford Focus IV (2018–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Specyfikacja techniczna
| Parameter | Value |
|---|---|
| Marka / Model | Ford Focus IV |
| Lata produkcji | 2018–2023 |
| Axle | Front |
| Typ łożyska | hub unit |
| Średnica wewnętrzna | 28 mm |
| Średnica zewnętrzna | 72 mm |
| Szerokość | 40 mm |
| Czujnik ABS | Not included |
| Interwał wymiany | 150 000 km |
Kompatybilne Wheel Bearings
| Producent | Numer części | Jakość |
|---|---|---|
| SKF | VKBA6868 | OE quality |
| FAG (Schaeffler) | 713645170 | OE quality |
| Timken | SP570101 | OE quality |
| SNR (NTN) | R151.10 | OE quality |
| Koyo | HA590501 | OE quality |
Interwał wymiany
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling nieise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Najczęstsze pytania
Which wheel bearing fits Ford Focus IV front?
SKF VKBA6868, FAG 713645170, Timken SP570101. Dimensions: 28×72×40 mm.
How do I diagniese a bad wheel bearing on Ford Focus IV?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Gdzie kupić