OEM Zamienniki | oemcross.com

Wheel bearing Hyundai Tucson TL front (2015–2020) — SKF, FAG, Timken, SNR

Front wheel bearing for Hyundai Tucson TL (2015–2020) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specyfikacja techniczna

ParameterValue
Marka / ModelHyundai Tucson TL
Lata produkcji2015–2020
AxleFront
Typ łożyskahub-unit
Średnica wewnętrzna42 mm
Średnica zewnętrzna75 mm
Szerokość38 mm
Czujnik ABSNot included
Interwał wymiany150 000 km

Kompatybilne Wheel Bearings

ProducentNumer częściJakość
SKFSKF VKBA7590OE quality
FAG (Schaeffler)FAG 713680310OE quality
TimkenTimken SP600209OE quality
SNR (NTN)SNR R169.16OE quality
KoyoKoyo WB01198OE quality

Interwał wymiany

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nieise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Najczęstsze pytania

Which wheel bearing fits Hyundai Tucson TL front?

SKF SKF VKBA7590, FAG FAG 713680310, Timken Timken SP600209. Dimensions: 42×75×38 mm.

How do I diagniese a bad wheel bearing on Hyundai Tucson TL?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.