Wheel bearing Hyundai i30 III front (2017–2023) — SKF, FAG, Timken, SNR
Front wheel bearing for Hyundai i30 III (2017–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Specyfikacja techniczna
| Parameter | Value |
|---|---|
| Marka / Model | Hyundai i30 III |
| Lata produkcji | 2017–2023 |
| Axle | Front |
| Typ łożyska | hub-unit |
| Średnica wewnętrzna | 34 mm |
| Średnica zewnętrzna | 72 mm |
| Szerokość | 37 mm |
| Czujnik ABS | Not included |
| Interwał wymiany | 150 000 km |
Kompatybilne Wheel Bearings
| Producent | Numer części | Jakość |
|---|---|---|
| SKF | SKF VKBA7560 | OE quality |
| FAG (Schaeffler) | FAG 713680290 | OE quality |
| Timken | Timken SP570204 | OE quality |
| SNR (NTN) | SNR R168.25 | OE quality |
| Koyo | Koyo WB01185 | OE quality |
Interwał wymiany
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling nieise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Najczęstsze pytania
Which wheel bearing fits Hyundai i30 III front?
SKF SKF VKBA7560, FAG FAG 713680290, Timken Timken SP570204. Dimensions: 34×72×37 mm.
How do I diagniese a bad wheel bearing on Hyundai i30 III?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Gdzie kupić