OEM Zamienniki | oemcross.com

Wheel bearing Audi A4 B9 rear (2015–2023) — SKF, FAG, Timken, SNR

Rear wheel bearing for Audi A4 B9 (2015–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specyfikacja techniczna

ParameterValue
Marka / ModelAudi A4 B9
Lata produkcji2015–2023
AxleRear
Typ łożyskahub unit
Średnica wewnętrzna32 mm
Średnica zewnętrzna72 mm
Szerokość37 mm
Czujnik ABSNot included
Interwał wymiany150 000 km

Kompatybilne Wheel Bearings

ProducentNumer częściJakość
SKFVKBA6591OE quality
FAG (Schaeffler)713678290OE quality
TimkenSP500401OE quality
SNR (NTN)R155.91OE quality
KoyoHA590102OE quality

Interwał wymiany

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling nieise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Najczęstsze pytania

Which wheel bearing fits Audi A4 B9 rear?

SKF VKBA6591, FAG 713678290, Timken SP500401. Dimensions: 32×72×37 mm.

How do I diagniese a bad wheel bearing on Audi A4 B9?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.