Brake fluid Seat Leon III (2012–2020) — DOT 4 specification
Brake fluid for Seat Leon III (2012–2020) — required specification, boiling points, system volume, and approved brands.
Specyfikacja techniczna
| Parameter | Value |
|---|---|
| Marka / Model | Seat Leon III |
| Lata produkcji | 2012–2020 |
| Specyfikacja płynu | DOT 4 |
| Sucha temperatura wrzenia | 230°C |
| Mokra temperatura wrzenia | 155°C |
| Objętość układu | 500 ml |
| Interwał wymiany | 60 000 km / lat |
Zatwierdzone marki
Castrol DOT 4 / ATE Super DOT 4 / Liqui Moly DOT 4
Why Brake Fluid Must Be Changed Regularly
Brake fluid is hygroscopic — it absorbs moisture from the air over time. As moisture content increases, the boiling point drops significantly. When the fluid boils under heavy braking, vapour bubbles form and the pedal goes to the floor (vapour lock). Seat requires DOT 4 with a dry boiling point of at least 230°C.
How to Check Brake Fluid Condition
- Test strips — dip a strip in the reservoir; colour indicates moisture content
- Electronic tester — measures boiling point directly (most accurate)
- Visual inspection — dark/brown fluid indicates it must be replaced (fresh fluid is amber/clear)
Najczęstsze pytania
What brake fluid does Seat Leon III use?
DOT 4 specification. Sucha temperatura wrzenia: 230°C. Objętość układu: 500 ml. Zatwierdzone marki: Castrol DOT 4 / ATE Super DOT 4 / Liqui Moly DOT 4.
How often should I change brake fluid in Seat Leon III?
Every 60 000 km or every lat — whichever comes first. This is a safety-critical service.
Can I mix different DOT grades?
You can mix DOT 3 and DOT 4 in an emergency, but never mix DOT 5 (silicone-based) with DOT 3/4 (glycol-based). Always use the correct specification: DOT 4.
Gdzie kupić