OEM Kruisverwijzing | oemcross.com

Wheel bearing Toyota Hilux VIII front (2016–2024) — SKF, FAG, Timken, SNR

Front wheel bearing for Toyota Hilux VIII (2016–2024) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Technische specificaties

ParameterValue
Merk / ModelToyota Hilux VIII
Productiejaren2016–2024
AxleFront
Lagertypehub unit
Binnendiameter35 mm
Buitendiameter88 mm
Breedte47 mm
ABS-sensorNot included
Vervangingsinterval120 000 km

Compatibele Wheel Bearings

FabrikantOnderdeelnummerKwaliteit
SKFVKBA7560OE quality
FAG (Schaeffler)713623950OE quality
TimkenSP600101OE quality
SNR (NTN)R190.08OE quality
KoyoHA591301OE quality

Vervangingsinterval

Wheel bearings typically last 120 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling neeise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Veelgestelde vragen

Which wheel bearing fits Toyota Hilux VIII front?

SKF VKBA7560, FAG 713623950, Timken SP600101. Dimensions: 35×88×47 mm.

How do I diagneese a bad wheel bearing on Toyota Hilux VIII?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.