OEM Kruisverwijzing | oemcross.com

Wheel bearing Hyundai Tucson NX4 front (2020–2025) — SKF, FAG, Timken, SNR

Front wheel bearing for Hyundai Tucson NX4 (2020–2025) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Technische specificaties

ParameterValue
Merk / ModelHyundai Tucson NX4
Productiejaren2020–2025
AxleFront
Lagertypehub unit
Binnendiameter28 mm
Buitendiameter78 mm
Breedte42 mm
ABS-sensorNot included
Vervangingsinterval150 000 km

Compatibele Wheel Bearings

FabrikantOnderdeelnummerKwaliteit
SKFVKBA6910OE quality
FAG (Schaeffler)713644770OE quality
TimkenSP530201OE quality
SNR (NTN)R186.50OE quality
KoyoHA590601OE quality

Vervangingsinterval

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling neeise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Veelgestelde vragen

Which wheel bearing fits Hyundai Tucson NX4 front?

SKF VKBA6910, FAG 713644770, Timken SP530201. Dimensions: 28×78×42 mm.

How do I diagneese a bad wheel bearing on Hyundai Tucson NX4?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.