OEM Cross-Riferimento | oemcross.com

Wheel bearing Peugeot 3008 II front (2016–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Peugeot 3008 II (2016–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specifiche tecniche

ParameterValue
Marca / ModelloPeugeot 3008 II
Anni di produzione2016–2023
AxleFront
Tipo di cuscinettohub unit
Diametro interno30 mm
Diametro esterno72 mm
Larghezza37 mm
Sensore ABSNot included
Intervallo di sostituzione150 000 km

Compatibili Wheel Bearings

ProduttoreCodice ricambioQualità
SKFVKBA6780OE quality
FAG (Schaeffler)713678390OE quality
TimkenSP560201OE quality
SNR (NTN)R170.20OE quality
KoyoHA591401OE quality

Intervallo di sostituzione

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Domande frequenti

Which wheel bearing fits Peugeot 3008 II front?

SKF VKBA6780, FAG 713678390, Timken SP560201. Dimensions: 30×72×37 mm.

How do I diagnose a bad wheel bearing on Peugeot 3008 II?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.