OEM Cross-Riferimento | oemcross.com

Wheel bearing Kia Sportage IV front (2015–2022) — SKF, FAG, Timken, SNR

Front wheel bearing for Kia Sportage IV (2015–2022) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specifiche tecniche

ParameterValue
Marca / ModelloKia Sportage IV
Anni di produzione2015–2022
AxleFront
Tipo di cuscinettohub unit
Diametro interno28 mm
Diametro esterno78 mm
Larghezza42 mm
Sensore ABSNot included
Intervallo di sostituzione150 000 km

Compatibili Wheel Bearings

ProduttoreCodice ricambioQualità
SKFVKBA6910OE quality
FAG (Schaeffler)713644770OE quality
TimkenSP530201OE quality
SNR (NTN)R186.50OE quality
KoyoHA590601OE quality

Intervallo di sostituzione

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Domande frequenti

Which wheel bearing fits Kia Sportage IV front?

SKF VKBA6910, FAG 713644770, Timken SP530201. Dimensions: 28×78×42 mm.

How do I diagnose a bad wheel bearing on Kia Sportage IV?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.