OEM Cross-Riferimento | oemcross.com

Wheel bearing Ford Ranger T6 front (2011–2022) — SKF, FAG, Timken, SNR

Front wheel bearing for Ford Ranger T6 (2011–2022) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specifiche tecniche

ParameterValue
Marca / ModelloFord Ranger T6
Anni di produzione2011–2022
AxleFront
Tipo di cuscinettohub unit
Diametro interno33 mm
Diametro esterno85 mm
Larghezza45 mm
Sensore ABSNot included
Intervallo di sostituzione120 000 km

Compatibili Wheel Bearings

ProduttoreCodice ricambioQualità
SKFVKBA7471OE quality
FAG (Schaeffler)713623900OE quality
TimkenSP590101OE quality
SNR (NTN)R190.05OE quality
KoyoHA591201OE quality

Intervallo di sostituzione

Wheel bearings typically last 120 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Domande frequenti

Which wheel bearing fits Ford Ranger T6 front?

SKF VKBA7471, FAG 713623900, Timken SP590101. Dimensions: 33×85×45 mm.

How do I diagnose a bad wheel bearing on Ford Ranger T6?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.