OEM Cross-Riferimento | oemcross.com

Wheel bearing Nissan Juke II front (2019–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Nissan Juke II (2019–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specifiche tecniche

ParameterValue
Marca / ModelloNissan Juke II
Anni di produzione2019–2023
AxleFront
Tipo di cuscinettohub-unit
Diametro interno42 mm
Diametro esterno75 mm
Larghezza38 mm
Sensore ABSNot included
Intervallo di sostituzione150 000 km

Compatibili Wheel Bearings

ProduttoreCodice ricambioQualità
SKFSKF VKBA7470OE quality
FAG (Schaeffler)FAG 713680260OE quality
TimkenTimken SP570203OE quality
SNR (NTN)SNR R168.24OE quality
KoyoKoyo WB01194OE quality

Intervallo di sostituzione

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Domande frequenti

Which wheel bearing fits Nissan Juke II front?

SKF SKF VKBA7470, FAG FAG 713680260, Timken Timken SP570203. Dimensions: 42×75×38 mm.

How do I diagnose a bad wheel bearing on Nissan Juke II?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.