OEM Cross-Riferimento | oemcross.com

Wheel bearing Jeep Compass II front (2016–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for Jeep Compass II (2016–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Specifiche tecniche

ParameterValue
Marca / ModelloJeep Compass II
Anni di produzione2016–2023
AxleFront
Tipo di cuscinettohub-unit
Diametro interno34 mm
Diametro esterno72 mm
Larghezza37 mm
Sensore ABSNot included
Intervallo di sostituzione150 000 km

Compatibili Wheel Bearings

ProduttoreCodice ricambioQualità
SKFSKF VKBA3534OE quality
FAG (Schaeffler)FAG 713619590OE quality
TimkenTimken SP550209OE quality
SNR (NTN)SNR R151.23OE quality
KoyoKoyo WB01182OE quality

Intervallo di sostituzione

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Domande frequenti

Which wheel bearing fits Jeep Compass II front?

SKF SKF VKBA3534, FAG FAG 713619590, Timken Timken SP550209. Dimensions: 34×72×37 mm.

How do I diagnose a bad wheel bearing on Jeep Compass II?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.