Timing chain Renault Kadjar R9M (1.6d) — service life and replacement
Timing chain for Renault Kadjar R9M (1.6d, 2015–2022) — service life, wear symptoms, OEM number and Iwis / Morse equivalents.
Engine Specifications
| Parameter | Value |
|---|---|
| Marca / Modello | Renault Kadjar |
| Codice motore | R9M |
| Displacement / Fuel | 1.6d diesel |
| Anni di produzione | 2015–2022 |
| Chain Location | Front of engine |
| Chain Type | Duplex (double-row) |
Timing Chain Service Life
| Parameter | Value |
|---|---|
| Recommended replacement mileage | 150 000 km |
| OEM chain number | 130C17478R |
| Iwis equivalent | SL74-SFY-128 |
| Morse equivalent | RS8110-128 |
Timing chains do not have a fixed OEM replacement schedule, but replacement is recommended when wear symptoms appear or at the stated mileage.
Wear Symptoms and Known Issues
Guide cracking at 100-150k; replace complete kit
Typical timing chain stretch symptoms:
- Rattling or ticking noise on cold start (first 2–5 seconds)
- Fault codes P0016 / P0017 (camshaft position correlation)
- Rough idle
- Timing marks misalignment on inspection
Timing Chain Cross-Reference
| Manufacturer | Part Number |
|---|---|
| OEM (original) | 130C17478R |
| Iwis | SL74-SFY-128 |
| Morse / Borg Warner | RS8110-128 |
Replacement Recommendations
- Replace the full kit — chain, tensioner, guides, and sprockets if worn.
- Oil quality is critical — R9M requires quality oil changed every 10,000 km. Chain stretch is directly linked to oil maintenance.
- Diagnose when cold — symptoms disappear 30–60 seconds after start (oil reaches tensioner). Always check on a cold engine.
- Standard removal — chain is located at the front of the engine; job takes 4–8 hours.
Domande frequenti
When to replace the timing chain on Renault Kadjar R9M?
Replace when cold-start rattle appears or at 150 000 km. Do not delay — a broken or jumped chain means engine rebuild costing thousands.
Which timing chain replacement for R9M?
OEM 130C17478R is the safest choice. Quality alternatives: Iwis SL74-SFY-128 (German-made) and Morse RS8110-128. Avoid unknown-brand chains.
Why does the R9M timing chain only rattle when cold?
On a cold engine, oil has not yet filled the chain tensioner. If the rattle stops within 5–10 seconds — the chain is worn but still functional. If the rattle persists longer or does not stop — replace immediately.
Dove acquistare