Engine oil Peugeot 308 5FS (1.6 VTi) — viscosity and approvals

Which engine oil for Peugeot 308 5FS (1.6 VTi, 2007–2013) — viscosity, specifications, capacity and change interval.

Engine Specifications

Recommended Oil

Change oil when either condition is reached — mileage OR time. Never exceed both limits simultaneously.

Approved Oil Brands

Total Quartz 9000 5W-30 / Castrol Edge 5W-30 A5 / Shell Helix Ultra 5W-30

How to Choose Oil for 5FS

1. Viscosity must match specification — using the wrong viscosity grade is not acceptable. Only 5W-30 is approved for 5FS.
2. Check the approval code on the label — the can must show ACEA A5/B5 / PSA B71 2296 compliance. Regular oil with an incorrect approval may damage the engine.
3. Volume — when changing with a new filter, you need 4.0 L. Check the oil level with the dipstick 5 minutes after filling.
4. Do not mix grades — if topping up, use the same viscosity and specification.

Consequences of Using the Wrong Oil

• Oil with a wrong approval for a petrol engine can clog the DPF filter (diesel) or cause excessive oil consumption.
• Too thin oil (e.g. 10W-40 instead of 5W-30) accelerates timing chain/belt and crankshaft bearing wear.
• Too thick oil makes cold starting difficult and increases fuel consumption.

Domande frequenti

What oil goes in a Peugeot 308 5FS?

Viscosity 5W-30, approval ACEA A5/B5 / PSA B71 2296, volume 4.0 L. Recommended brands: Total Quartz 9000 5W-30 / Castrol Edge 5W-30 A5 / Shell Helix Ultra 5W-30.

How often to change the oil in Peugeot 308?

Every 10 000 km or 12 months — whichever comes first. With heavy city driving or short trips, every 7,500–10,000 km.

How much oil does the 5FS take?

4.0 litres with a new filter. Before ordering, double-check — some 308 variants with the same engine code may differ by 0.2–0.5 L.