Wheel bearing Audi Q5 FY front (2016–2023) — SKF, FAG, Timken, SNR
Front wheel bearing for Audi Q5 FY (2016–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Caractéristiques techniques
| Parameter | Value |
|---|---|
| Marque / Modèle | Audi Q5 FY |
| Années de production | 2016–2023 |
| Axle | Front |
| Type de roulement | hub-unit |
| Diamètre intérieur | 34 mm |
| Diamètre extérieur | 80 mm |
| Largeur | 45 mm |
| Capteur ABS | Not included |
| Intervalle de remplacement | 150 000 km |
Compatibles Wheel Bearings
| Fabricant | Référence | Qualité |
|---|---|---|
| SKF | SKF VKBA6843 | OE quality |
| FAG (Schaeffler) | FAG 713667330 | OE quality |
| Timken | Timken SP620310 | OE quality |
| SNR (NTN) | SNR R159.10 | OE quality |
| Koyo | Koyo WB01191 | OE quality |
Intervalle de remplacement
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling nonise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Questions fréquentes
Which wheel bearing fits Audi Q5 FY front?
SKF SKF VKBA6843, FAG FAG 713667330, Timken Timken SP620310. Dimensions: 34×80×45 mm.
How do I diagnonse a bad wheel bearing on Audi Q5 FY?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Où acheter