Wheel bearing Audi A4 B8 rear (2007–2015) — SKF, FAG, Timken, SNR
Rear wheel bearing for Audi A4 B8 (2007–2015) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Caractéristiques techniques
| Parameter | Value |
|---|---|
| Marque / Modèle | Audi A4 B8 |
| Années de production | 2007–2015 |
| Axle | Rear |
| Type de roulement | hub-unit |
| Diamètre intérieur | 34 mm |
| Diamètre extérieur | 64 mm |
| Largeur | 37 mm |
| Capteur ABS | Not included |
| Intervalle de remplacement | 150 000 km |
Compatibles Wheel Bearings
| Fabricant | Référence | Qualité |
|---|---|---|
| SKF | SKF VKBA6512 | OE quality |
| FAG (Schaeffler) | FAG 713678310 | OE quality |
| Timken | Timken SP940200 | OE quality |
| SNR (NTN) | SNR R151.24 | OE quality |
| Koyo | Koyo WB01183 | OE quality |
Intervalle de remplacement
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling nonise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Questions fréquentes
Which wheel bearing fits Audi A4 B8 rear?
SKF SKF VKBA6512, FAG FAG 713678310, Timken Timken SP940200. Dimensions: 34×64×37 mm.
How do I diagnonse a bad wheel bearing on Audi A4 B8?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Où acheter