Engine oil Mazda Mazda 3 BP PY-VPS (2.0 Skyactiv) — viscosity and approvals

Which engine oil for Mazda Mazda 3 BP PY-VPS (2.0 Skyactiv, 2019–2023) — viscosity, specifications, capacity and change interval.

Engine Specifications

Recommended Oil

Change oil when either condition is reached — mileage OR time. Never exceed both limits simultaneously.

Approved Oil Brands

Mazda Original Oil 5W-30 / Mobil 1 5W-30 / Castrol Edge 5W-30

How to Choose Oil for PY-VPS

1. Viscosity must match specification — using the wrong viscosity grade is not acceptable. Only 5W-30 is approved for PY-VPS.
2. Check the approval code on the label — the can must show Mazda Original / ILSAC GF-5 compliance. Regular oil with an incorrect approval may damage the engine.
3. Volume — when changing with a new filter, you need 4.8 L. Check the oil level with the dipstick 5 minutes after filling.
4. Do not mix grades — if topping up, use the same viscosity and specification.

Consequences of Using the Wrong Oil

• Oil with a wrong approval for a petrol engine can clog the DPF filter (diesel) or cause excessive oil consumption.
• Too thin oil (e.g. 10W-40 instead of 5W-30) accelerates timing chain/belt and crankshaft bearing wear.
• Too thick oil makes cold starting difficult and increases fuel consumption.

Questions frequentes

What oil goes in a Mazda Mazda 3 BP PY-VPS?

Viscosity 5W-30, approval Mazda Original / ILSAC GF-5, volume 4.8 L. Recommended brands: Mazda Original Oil 5W-30 / Mobil 1 5W-30 / Castrol Edge 5W-30.

How often to change the oil in Mazda Mazda 3 BP?

Every 10 000 km or 12 months — whichever comes first. With heavy city driving or short trips, every 7,500–10,000 km.

How much oil does the PY-VPS take?

4.8 litres with a new filter. Before ordering, double-check — some Mazda 3 BP variants with the same engine code may differ by 0.2–0.5 L.