Wheel bearing Mazda CX-5 KF front (2017–2023) — SKF, FAG, Timken, SNR
Front wheel bearing for Mazda CX-5 KF (2017–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.
Especificaciones técnicas
| Parameter | Value |
|---|---|
| Marca / Modelo | Mazda CX-5 KF |
| Años de producción | 2017–2023 |
| Axle | Front |
| Tipo de rodamiento | hub unit |
| Diámetro interior | 28 mm |
| Diámetro exterior | 78 mm |
| Ancho | 44 mm |
| Sensor ABS | Not included |
| Intervalo de sustitución | 150 000 km |
Compatibles Wheel Bearings
| Fabricante | Referencia | Calidad |
|---|---|---|
| SKF | VKBA7450 | OE quality |
| FAG (Schaeffler) | 713623780 | OE quality |
| Timken | SP530401 | OE quality |
| SNR (NTN) | R186.55 | OE quality |
| Koyo | HA590901 | OE quality |
Intervalo de sustitución
Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.
Always replace the ABS ring/tone wheel together with the bearing if it is integrated.
Signs of a Failing Wheel Bearing
- Humming or growling noise that changes with vehicle speed
- Noise increases when turning (load shifts to the worn bearing)
- Vibration felt through the steering wheel or floorpan
- Excessive play or wobble when the wheel is rocked by hand
Preguntas frecuentes
Which wheel bearing fits Mazda CX-5 KF front?
SKF VKBA7450, FAG 713623780, Timken SP530401. Dimensions: 28×78×44 mm.
How do I diagnose a bad wheel bearing on Mazda CX-5 KF?
Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.
Should wheel bearings be replaced in pairs?
Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.
Dónde comprar