OEM Referencia Cruzada | oemcross.com

Wheel bearing Kia Sportage IV front (2015–2022) — SKF, FAG, Timken, SNR

Front wheel bearing for Kia Sportage IV (2015–2022) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificaciones técnicas

ParameterValue
Marca / ModeloKia Sportage IV
Años de producción2015–2022
AxleFront
Tipo de rodamientohub unit
Diámetro interior28 mm
Diámetro exterior78 mm
Ancho42 mm
Sensor ABSNot included
Intervalo de sustitución150 000 km

Compatibles Wheel Bearings

FabricanteReferenciaCalidad
SKFVKBA6910OE quality
FAG (Schaeffler)713644770OE quality
TimkenSP530201OE quality
SNR (NTN)R186.50OE quality
KoyoHA590601OE quality

Intervalo de sustitución

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Preguntas frecuentes

Which wheel bearing fits Kia Sportage IV front?

SKF VKBA6910, FAG 713644770, Timken SP530201. Dimensions: 28×78×42 mm.

How do I diagnose a bad wheel bearing on Kia Sportage IV?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.