OEM Referencia Cruzada | oemcross.com

Wheel bearing BMW X1 F48 front (2015–2023) — SKF, FAG, Timken, SNR

Front wheel bearing for BMW X1 F48 (2015–2023) — SKF, FAG, Timken, SNR, Koyo part numbers, dimensions and replacement interval.

Especificaciones técnicas

ParameterValue
Marca / ModeloBMW X1 F48
Años de producción2015–2023
AxleFront
Tipo de rodamientohub-unit
Diámetro interior34 mm
Diámetro exterior80 mm
Ancho45 mm
Sensor ABSNot included
Intervalo de sustitución150 000 km

Compatibles Wheel Bearings

FabricanteReferenciaCalidad
SKFSKF VKBA6818OE quality
FAG (Schaeffler)FAG 713667330OE quality
TimkenTimken SP620304OE quality
SNR (NTN)SNR R159.03OE quality
KoyoKoyo WB01188OE quality

Intervalo de sustitución

Wheel bearings typically last 150 000 km. In reality, failure depends on road conditions — potholes and kerb impacts accelerate wear.

Always replace the ABS ring/tone wheel together with the bearing if it is integrated.

Signs of a Failing Wheel Bearing

  • Humming or growling noise that changes with vehicle speed
  • Noise increases when turning (load shifts to the worn bearing)
  • Vibration felt through the steering wheel or floorpan
  • Excessive play or wobble when the wheel is rocked by hand

Preguntas frecuentes

Which wheel bearing fits BMW X1 F48 front?

SKF SKF VKBA6818, FAG FAG 713667330, Timken Timken SP620304. Dimensions: 34×80×45 mm.

How do I diagnose a bad wheel bearing on BMW X1 F48?

Jack the car, grip the tyre at 12 and 6 o’clock and rock it. Excessive play indicates a worn bearing. Drive at 60–80 km/h on a quiet road — humming that changes pitch when you swerve confirms a bearing fault.

Should wheel bearings be replaced in pairs?

Not necessarily for hub-unit type bearings. Replace only the failed side. However, if the opposite bearing is close to the same mileage, replacing both saves labour costs.