Brake fluid Mitsubishi Outlander III (2012–2022) — DOT4 specification
Brake fluid for Mitsubishi Outlander III (2012–2022) — required specification, boiling points, system volume, and approved brands.
Technische Daten
| Parameter | Value |
|---|---|
| Marke / Modell | Mitsubishi Outlander III |
| Baujahr | 2012–2022 |
| Flüssigkeitsspezifikation | DOT4 |
| Trockener Siedepunkt | 230°C |
| Nasser Siedepunkt | 155°C |
| Systemvolumen | 600 ml |
| Wechselintervall | 40 000 km / Jahre |
Freigegebene Marken
Mitsubishi Genuine, ATE SL.6, Motul DOT4
Why Brake Fluid Must Be Changed Regularly
Brake fluid is hygroscopic — it absorbs moisture from the air over time. As moisture content increases, the boiling point drops significantly. When the fluid boils under heavy braking, vapour bubbles form and the pedal goes to the floor (vapour lock). Mitsubishi requires DOT4 with a dry boiling point of at least 230°C.
How to Check Brake Fluid Condition
- Test strips — dip a strip in the reservoir; colour indicates moisture content
- Electronic tester — measures boiling point directly (most accurate)
- Visual inspection — dark/brown fluid indicates it must be replaced (fresh fluid is amber/clear)
Häufige Fragen
What brake fluid does Mitsubishi Outlander III use?
DOT4 specification. Trockener Siedepunkt: 230°C. Systemvolumen: 600 ml. Freigegebene Marken: Mitsubishi Genuine, ATE SL.6, Motul DOT4.
How often should I change brake fluid in Mitsubishi Outlander III?
Every 40 000 km or every Jahre — whichever comes first. This is a safety-critical service.
Can I mix different DOT grades?
You can mix DOT 3 and DOT 4 in an emergency, but never mix DOT 5 (silicone-based) with DOT 3/4 (glycol-based). Always use the correct specification: DOT4.