Coolant spec Peugeot 208 II (2019–2024) — type, volume, change interval
Which coolant to use in Peugeot 208 II (2019–2024) — type, colour, system volume and replacement interval.
Cooling System Specifications
| Parameter | Value |
|---|---|
| Make / Model | Peugeot 208 II |
| Production Years | 2019–2024 |
| Coolant type | LOBRID |
| Colour | pink |
| System volume | 5.0 L |
| Mix ratio | 50/50 (concentrate / water) |
| OEM approval | Stellantis 9735.A3 |
| Replacement interval | every 5 years |
Coolant replacement is time-based, not mileage-based. Corrosion inhibitors degrade over time regardless of how far you drive.
Approved Coolant Brands
Total Coolelf STXG / Prestone Peugeot / Liqui Moly KFS
Mixing Rules
- Do not mix different coolant types (G11/G12/G13) — mixing causes a chemical reaction and sludge formation.
- When topping up, use the same type: LOBRID.
- Always dilute concentrate with distilled water at a ratio of 50/50.
- Freeze protection at 50/50 mix: approximately –37°C.
Checking Coolant Level and Condition
- Check the level in the expansion tank on a cold engine — it should be between MIN and MAX marks.
- Fresh LOBRID coolant is pink. Brown, cloudy or sediment-filled coolant must be replaced immediately.
- Hydrometer test: density at 50/50 mix should be 1.060–1.080 g/cm³.
FAQ
Which coolant should I use in Peugeot 208 II?
Type LOBRID (pink), approval Stellantis 9735.A3. Compatible brands: Total Coolelf STXG / Prestone Peugeot / Liqui Moly KFS.
How much coolant does a Peugeot 208 II hold?
The total cooling system volume is 5.0 L. A partial change will require less — calculate based on the volume drained.
How often should coolant be replaced in Peugeot 208 II?
Every 5 years, regardless of mileage. Do not delay — depleted coolant causes corrosion of aluminium engine components.
Where to Buy