Coolant spec Audi A3 8V (2012–2020) — type, volume, change interval
Which coolant to use in Audi A3 8V (2012–2020) — type, colour, system volume and replacement interval.
Cooling System Specifications
| Parameter | Value |
|---|---|
| Make / Model | Audi A3 8V |
| Production Years | 2012–2020 |
| Coolant type | G12++ |
| Colour | violet-pink |
| System volume | 5.7 L |
| Mix ratio | 50/50 (concentrate / water) |
| OEM approval | TL-VW 774 G |
| Replacement interval | every 5 years |
Coolant replacement is time-based, not mileage-based. Corrosion inhibitors degrade over time regardless of how far you drive.
Approved Coolant Brands
Febi G12++ / Liqui Moly KFS G12 EVO / BASF Glysantin G40
Mixing Rules
- Do not mix different coolant types (G11/G12/G13) — mixing causes a chemical reaction and sludge formation.
- When topping up, use the same type: G12++.
- Always dilute concentrate with distilled water at a ratio of 50/50.
- Freeze protection at 50/50 mix: approximately –37°C.
Checking Coolant Level and Condition
- Check the level in the expansion tank on a cold engine — it should be between MIN and MAX marks.
- Fresh G12++ coolant is violet-pink. Brown, cloudy or sediment-filled coolant must be replaced immediately.
- Hydrometer test: density at 50/50 mix should be 1.060–1.080 g/cm³.
FAQ
Which coolant should I use in Audi A3 8V?
Type G12++ (violet-pink), approval TL-VW 774 G. Compatible brands: Febi G12++ / Liqui Moly KFS G12 EVO / BASF Glysantin G40.
How much coolant does a Audi A3 8V hold?
The total cooling system volume is 5.7 L. A partial change will require less — calculate based on the volume drained.
How often should coolant be replaced in Audi A3 8V?
Every 5 years, regardless of mileage. Do not delay — depleted coolant causes corrosion of aluminium engine components.
Where to Buy