Brake fluid Subaru Forester SK (2018–2024) — DOT4 specification
Brake fluid for Subaru Forester SK (2018–2024) — required specification, boiling points, system volume, and approved brands.
Technical Specifications
| Parameter | Value |
|---|---|
| Make / Model | Subaru Forester SK |
| Production Years | 2018–2024 |
| Fluid specification | DOT4 |
| Dry boiling point | 230°C |
| Wet boiling point | 155°C |
| System volume | 600 ml |
| Change interval | 40 000 km / 2 years |
Approved brands
Subaru Genuine DOT4, ATE SL.6, Prestone DOT4
Why Brake Fluid Must Be Changed Regularly
Brake fluid is hygroscopic — it absorbs moisture from the air over time. As moisture content increases, the boiling point drops significantly. When the fluid boils under heavy braking, vapour bubbles form and the pedal goes to the floor (vapour lock). Subaru requires DOT4 with a dry boiling point of at least 230°C.
How to Check Brake Fluid Condition
- Test strips — dip a strip in the reservoir; colour indicates moisture content
- Electronic tester — measures boiling point directly (most accurate)
- Visual inspection — dark/brown fluid indicates it must be replaced (fresh fluid is amber/clear)
FAQ
What brake fluid does Subaru Forester SK use?
DOT4 specification. Dry boiling point: 230°C. System volume: 600 ml. Approved brands: Subaru Genuine DOT4, ATE SL.6, Prestone DOT4.
How often should I change brake fluid in Subaru Forester SK?
Every 40 000 km or every 2 years — whichever comes first. This is a safety-critical service.
Can I mix different DOT grades?
You can mix DOT 3 and DOT 4 in an emergency, but never mix DOT 5 (silicone-based) with DOT 3/4 (glycol-based). Always use the correct specification: DOT4.
Where to Buy