Brake fluid Honda CR-V V (2016–2023) — DOT 3 specification
Brake fluid for Honda CR-V V (2016–2023) — required specification, boiling points, system volume, and approved brands.
Technical Specifications
| Parameter | Value |
|---|---|
| Make / Model | Honda CR-V V |
| Production Years | 2016–2023 |
| Fluid specification | DOT 3 |
| Dry boiling point | 205°C |
| Wet boiling point | 140°C |
| System volume | 500 ml |
| Change interval | 60 000 km / 2 years |
Approved brands
Honda Ultra DOT 3 / ATE DOT 3 / Castrol DOT 3
Why Brake Fluid Must Be Changed Regularly
Brake fluid is hygroscopic — it absorbs moisture from the air over time. As moisture content increases, the boiling point drops significantly. When the fluid boils under heavy braking, vapour bubbles form and the pedal goes to the floor (vapour lock). Honda requires DOT 3 with a dry boiling point of at least 205°C.
How to Check Brake Fluid Condition
- Test strips — dip a strip in the reservoir; colour indicates moisture content
- Electronic tester — measures boiling point directly (most accurate)
- Visual inspection — dark/brown fluid indicates it must be replaced (fresh fluid is amber/clear)
FAQ
What brake fluid does Honda CR-V V use?
DOT 3 specification. Dry boiling point: 205°C. System volume: 500 ml. Approved brands: Honda Ultra DOT 3 / ATE DOT 3 / Castrol DOT 3.
How often should I change brake fluid in Honda CR-V V?
Every 60 000 km or every 2 years — whichever comes first. This is a safety-critical service.
Can I mix different DOT grades?
You can mix DOT 3 and DOT 4 in an emergency, but never mix DOT 5 (silicone-based) with DOT 3/4 (glycol-based). Always use the correct specification: DOT 3.
Where to Buy